Montana PRIMER 400ml - ALUMINIUM T2450 creates a neutral surface on aluminum to prepare it for further coating with acrylic, NC (Nitro-Combi) or synthetic paints. With built-in properties that resist flaking and cracking on aluminum, ALUMINIUM PRIMER is a light gray color with a matte finish that gives your aluminum coatings the longest possible life and the highest aesthetic results. Application of ALUMINIUM PRIMER promotes optimal adhesion for your artwork, objects or DIY projects for application of Montana GOLD, Montana BLACK, Montana WHITE, Montana TECH and EFFECT coatings. With limitations, ALUMINIUM PRIMER can also provide similar protection on copper and zinc. For best results, the surface should be pre-sanded with fine grit sandpaper prior to application and ensure that it is clean, dry and free of dust and oils. Further coating is also possible with Montana TECH, EFFECT and Montana Cans color palettes. Smooth, even application is effortless thanks to the medium pressure and standard Montana FLAT JET CAP medium. For additional application caps, we also recommend others from the FLAT JET Cap range. We recommend testing a non-visible area of your material to check compatibility. APPLICATION: Shake the can vigorously for 2-3 minutes before use. Apply ALUMINIUM PRIMER in several thin coats in an even motion. Allow 5 minutes drying time between coats. Coating with paints can be applied after 2-4 hours drying time. Additional coats of alternative products may require a drying time of 24 hours or longer, depending on the coating. Always test the spray in a non-visible area to verify compatibility of the coating or paint. Always store cans with the nozzle facing down for optimal life.

Montana METAL PRIMER is the perfect tool if you want to create a neutral finish on metal surfaces to which you want to apply other coatings. With antioxidant properties that help resist rust, METAL PRIMER has a matte finish and will give your metal project the longest possible life and the highest aesthetic results. Applying METAL PRIMER to your artwork or DIY project creates the best adhesion and protection for additional coatings such as Montana GOLD, Montana BLACK or Montana WHITE paints. The METAL PRIMER also provides further protection against scratches and dents. METAL PRIMER is designed for optimal pretreatment of metal surfaces (iron or brass) and mineral surfaces. Make sure your surface is clean, dry and free of dust and oils before application to ensure your Montana METAL PRIMER provides the ultimate base for further coating. Further coating is possible with Montana TECH and Montana Cans color palettes. Smooth, even application is effortless thanks to the Montana FLAT JET CAP medium that comes standard on the can. For more application caps, you can try the FLAT JET WIDE, the FAT CAP GOLD/BLACK or one of the Montana LEVEL 1-3 caps. It is important to give the METAL PRIMER sufficient time to cure (24 hours or more) before applying any additional coatings. We recommend testing a non-visible area of your material to check compatibility. Please note that Metal Primer is not suitable for pretreatment of aluminum.APPLICATION: Apply the primer in several thin coats, spraying before the previous coat is completely dry, but with 1 or 2 minutes between each pass. Additional coats may require a drying time of 24 hours or longer, depending on the substrate. Always test the spray in a non-visible area to verify the compatibility of the paint or varnish. Always store cans with the nozzle facing down for optimal life.

The Montana UNIVERSAL PRIMER is the perfect tool if you want to create a neutral surface on which to apply other coatings. As the all-rounder of the Montana PRIMER series, the UNIVERSAL PRIMER is the primer for those who only need one primer for different surfaces. Montana UNIVERSAL PRIMER is ideal for sealing and preparing surfaces for efficient application of further layers of paint. UNIVERSAL PRIMER aids adhesion, maximizes coverage of additional coatings, seals porous surfaces and protects against the elements. It provides protection against rust, a smooth working surface, and generally prepares and protects the substrate for further coatings. Montana UNIVERSAL also increases the durability of surfaces after coating. We recommend testing a non-visible area of your material to check compatibility. You can apply any Montana-Cans, TECH or EFFECT paint spray to the UNIVERSAL PRIMER once it has dried and cured. Montana UNIVERSAL PRIMER increases the intensity and longevity of the coatings applied over it. Drying time is 24 hours or longer, depending on ambient temperature and humidity. Montana UNIVERSAL PRIMER is a white colored, semi-gloss nitro-combi based coating that provides a neutral color base for application of any color palette of Montana GOLD, Montana BLACK or Montana WHITE. Montana UNIVERSAL PRIMER can be applied to wood, metal, solid paper, cardboard, concrete, ceramics and other materials. Thanks to the Montana FLAT JET Medium Cap, which is standard on the can, an even, smooth application is effortless. To vary spray application, we recommend using the Montana FLAT JET WIDE, the FAT CAP GOLD/BLACK or one of the Montana LEVEL 1-3 Caps. Make sure all surfaces are completely clean and free of dust, oil and rust. For rust areas, make sure rust is completely removed before application. APPLICATION: Apply primer in several thin coats, spraying before the previous coat is completely dry, but with 1 or 2 minutes between each pass. Additional coats may require a drying time of 24 hours or longer, depending on the substrate. Always test the spray in a non-visible area to verify the compatibility of the paint or varnish. Always store cans with the nozzle facing down for optimal life.

Montana POLYSTYRENE PRIMER is the perfect tool if you want to create a neutral surface on polystyrene and styrofoam-based surfaces to which you want to apply further coatings. Montana POLYSTYRENE PRIMER is ideal for sealing and preparing polystyrene and styrofoam-based materials for efficient application of paint coats. The POLYSTYRENE PRIMER promotes adhesion, maximizes coverage of additional coatings, seals porous surfaces, and resists agitation of additional solvent-based coatings once all surface holes are covered. Montana POLYSTYRENE PRIMER also increases the durability of polystyrene- or styrofoam-based surfaces once they are coated. Due to the diverse chemical composition of polystyrene, we recommend testing a non-visible area of your material to check compatibility. You can apply any color of Montana cans, TECH or EFFECT spray over the POLYSTYRENE PRIMER once it has dried and cured. Montana POLYSTYRENE PRIMER increases the intensity and durability of the coatings applied over it. Drying time is 24 hours or more, depending on ambient temperature and moisture content. Montana POLYSTYRENE PRIMER is a beige-brown, matte coating in the form of a nitro-combi based composition that provides a relatively neutral color base for application of the Montana GOLD, Montana BLACK or Montana WHITE color spectrum. Smooth and even application is effortless thanks to the Montana FLAT JET CAP medium that comes standard on the can. For other application caps, you can try the Montana FLAT JET WIDE, the FAT CAP GOLD/BLACK or one of the Montana LEVEL 1-3 caps. Remember to keep your polystyrene projects away from extreme heat or flames. Make sure all surfaces are fully sealed and holes are closed. The rougher and more holes the substrate has, the more coats of POLYSTYRENE PRIMER will be needed to provide complete protection against further solvent-based paint coatings.APPLICATION: Apply the primer in several thin coats, spraying before the previous coat is completely dry, but with 1 or 2 minutes between each pass. Additional coats may require a drying time of 24 hours or longer, depending on the substrate. Always test the spray in a non-visible area to verify the compatibility of the paint or varnish. Always store cans with the nozzle facing down for optimal life.

The Montana PLASTIC PRIMER is the perfect tool if you want to create a neutral surface on plastic surfaces to which you want to apply further coatings. The PLASTIC PRIMER is ideal for sealing and preparing plastic materials for efficient application of paint coats. PLASTIC PRIMER promotes adhesion, maximizes coverage of additional coatings, seals porous surfaces and reduces the risk of cracking and crazing. Montana PLASTIC PRIMER is a surface preparer that can be used on hard plastics such as polyurethane (PUR), polystyrene (PS), polyamide (PA), modified polypropylene (EPDM), acrylonitrile butadiene styrene plastics (ABS), glass fiber reinforced plastics (GRP) and hard polyvinyl chloride (hard PVC). Due to the diverse chemical composition of plastics, we recommend testing a non-visible area of your material to check compatibility. You can apply any color of Montana cans, TECH or EFFECT spray over the PLASTIC PRIMER once it has dried and cured. Montana PLASTIC PRIMER increases the intensity and durability of the coatings applied over it. Drying time is 24 hours or more, depending on ambient temperature and moisture content. Montana PLASTIC PRIMER is a semi-matte, transparent white product in the form of a nitro-combi based coating that provides a neutral color base for application of the Montana GOLD, Montana BLACK or Montana WHITE color spectrum. Smooth and even application is effortless thanks to the Montana FLAT JET CAP medium that comes standard on the can. For other application caps, you can try the Montana FLAT JET WIDE, the FAT CAP GOLD/BLACK or one of the Montana LEVEL 1-3 caps. Due to possible expansion and contraction of all plastics, we recommend that you do not expose your plastic projects to extreme weather conditions or temperature changes. Make sure all surfaces are clean, dry and free of dust and oils before applying PLASTIC PRIMER. Montana PLASTIC PRIMER is not recommended for use with soft plastics.APPLICATION: Apply the primer in several thin coats, spraying before the previous coat is completely dry, but with 1 or 2 minutes between each pass. Additional coats may require a drying time of 24 hours or longer, depending on the substrate. Always test the spray in a non-visible area to verify the compatibility of the paint or varnish. Always store cans with the nozzle facing down for optimal life.